ILM Schedule > Modify Launch Step
Input pad for modification of launching steps, defined by Launching Sequence Macro within ILM Preprocessor. This pad consists of three components: In the upper part the launching steps are specified, which should be modified. The Check buttons at the bottom can be used to modify only some information of of above launching steps. And depending on the selected Check buttons the related information can be modified in the central block of this pad.
Input the launching steps for modification:
| Setting | Description |
|---|---|
| From launch | Number of first launching step in the modified series |
| To launch | Number of the last launching step in the modified series |
| Launch step | Step increment in the modified launching step series Depending on the selected Check buttons, below, following information can be modified |
| Segment Name | Name of the Segment for launching. Tip: For easy selection press the arrow beside, which will open the Segment list containing all nose and girder segments of current project.
|
| Step length | The moving length of one launching step. |
| Stage Name | Name of the stage which is prepared in the schedule for these launching steps.Hint: For easy selection press the arrow beside, which will open the Stage list containing all stages of current project. |
| LCase Name | Name of the load case which is prepared for calculation and result storage of the launching steps. Tip: For easy selection press the arrow beside, which will open the Load case list containing all user defined load cases of current project.
|
| LSet Name | Name of the load set, above load case consists of. Tip: For easy selection press the arrow beside, which will open the Load set list containing all user defined load sets of current project.
|
Use the Check buttons to specify which information should be modified:
- Segment name - For modification of the segment name in the selected launch steps
- Step length - For modification of step length in the selected launch steps
- Stage number - For modification of stage number in the selected launch steps
- Load case number - For modification of load case name in the selected launch steps
- Load Set number - For modification of load set name in the selected launch steps